October 12, 2021

First Try at Tomato Powder

Have you ever made tomato powder? Lots of people have, usually with tomato skins reserved from canning projects. Since I use a Roma juicer to process tomatoes for sauce, I don't end up with skins. So I've never tried making tomato powder. This year, however, I have so many cherry tomatoes, that I decided give it a try. 

Matt's Wild Cherry Tomatoes. Very prolific.

First, the cherry tomatoes had to be dehydrated. Powdering dried foods requires that they are very crispy to rock hard. Because of our humidity, however, dried food goes from hard to soft as it absorbs moisture from the air. 

It took several days to get the tiny tomatoes thoroughly dried.

Experience has taught me that to powder things, I need to get them into the blender as soon as they have cooled to room temperature. 


I don't have the best blender in the world, but I was pleased that everything, including skins and seeds, powdered pretty well.

First jar of powdered cherry tomatoes.

I put them in a jar, which I vacuum sealed for pantry storage. I plan to try them in soups, stews, dips, and salad dressings. Since properly dehydrated and stored foods keep for years, this seems like a good thing to do with all those extra cherry tomatoes.

Those of you who use tomato powder, do you have any recipes to share?

October 8, 2021

Forest Garden: Poking Around in the Dirt

While Dan has been working on the outdoor kitchen cookstove, I've been working on the forest garden (you can see photos and read my planning post, here). As with all gardening projects, the first step was to grab a shovel and take a good look at the soil.

The area of the forest garden is located at a high point on our property (see link above). It is roughly triangle shaped. Contour-wise, I'm looking at this:

High and low spots in the future forest garden.

In the above photo, the yellow line represents a small, shallow ridge. This is the highest spot. The blue oval is the lowest spot, which is dish shaped. In walking the area and looking closely at the ground, I observed several things.

The ground along the ridge - no topsoil.

Trees and brush have grown here for many years. After we fenced in the pasture, the goats ate the brush, which opened up the area. Dan took out a few trees, but most of them have remained and will form our forest garden canopy layer. That means a lot of leaves are dumped on the ground every fall, yet, the top soil is pretty much washed away. 

A little farther down on the ridge the soil seemed softer, with a few bricks lying around. I started poking around with a shovel.

Sand and buried bricks.

Under the thin veneer of decayed leaves, I discovered pure sand and buried bricks. The sand looked like builders sand, and it seems this spot was a dumping ground long ago for leftover materials from a building project.

Also found, homestead relics?

Neither absence of topsoil nor sand hold water, so I'm going to have to do a lot of work on the soil here if my forest garden is going to thrive.

In the low spot, the surface soil looked much, much better:

The ground in the blue oval in the first photo - lovely black topsoil.

When I dug here, I discovered the soil looks like this:

Thick black topsoil and clay subsoil.

The topsoil is black (indicating a lot of decayed organic matter), sandy (which is typical of our cecil sandy loam topsoil), and about five to six inches deep. That was a pleasant surprise because in most places around the homestead, black topsoil (if there is any) is less than an inch deep.

What to make of this? My theory is that most of the fallen autumn leaves are washed off the little ridge in heavy rains and deposited in the low spot. That would explain the absence of topsoil on the ridge and the thick layer of black topsoil in the low area.

I found another relic while digging in the soil here.

It was buried about 6 or 7 inches down.

The other observation that is noteworthy, is that even after several inches of rain in previous days, the soil was only moist in the top three inches or so. Beneath that, it was bone dry. That surprised me too and indicates that the ground isn't getting a deep soaking, even with a lot of rain. This information tells me that our conditioning the pasture soil with a subsoiler was a good decision. For the forest garden, the subsoiler isn't feasible, so I'll need to work on other ways to deep soak the soil.

So, this is my starting point. Hopefully, over time, I can document positive changes in the soil in my forest garden. For now, I'm pulling out all the soil building strategies I can muster, and getting ready to put them to work. 

October 4, 2021

Outdoor Kitchen: Wood Cookstove Firebox Side

Continued from here. 

Something unique about the wood cookstove Dan is building, is that the oven and the firebox are on different sides of the stove. The firebox is on the front, and the oven is on the back (or vice versa, depending on one's viewpoint.) Why the designer made it that way is unknown; maybe because his house was an open design and having the firebox on the living room side enabled easier feeding of the fire. I don't know. The original design had a fire viewing window at the back of the firebox. A nice feature, but unnecessary for us. We might could have put the doors on the same side, but making too many changes to an untried design didn't seem like a good idea. The plans were confusing enough as it was. On the bright side, having the firebox where it is will make it easier to toss in a little more wood to maintain cooking or baking heat.

Anyway, I hope that answers a question that might pop unto your mind as you look at my pictures. Now, on to the progress.

More on the construction of the firebox and core here.

Checking the fit of the firebox door.

The photo above shows a unique feature of the batch box firebox design. The tubular steel beneath the door is the secondary air intake. The primary intake is the slot in the door. In this design, the tube fits into a channel in the bottom of the firebox (see photo below) and channels air to the back of the firebox. This is part of the core design and results in a very clean burn of the firewood. 

Brickwork for front finished.

Close-up at a different angle.

Another question you might have (I would, if I was you) is, why is the door set so far back? Why isn't the door flush with the front brick face of the stove? That is the result of poorly written plans, and why I'm not linking to them. The plans were mostly a series of layered schematics, with little to no explanation of what was going on. Equally unfortunate, the recommended videos showed stoves with something different than the plans. It was both confusing and frustrating, and why this was almost an abandoned project! 

Firebox door in place without the 2ndary air channel.

The next step will be the stovetop, and that has become another adventure in creativity. I have to hand it to Dan. He's ordinarily quite willing to modify something as he sees fit, but this stove had him stumped. He finally decided to plow ahead in hopes that it worked out. It will still work as a cookstove, but its heat efficiency as a batch box stove remains to be seen.

Dan will also admit he isn't very satisfied with the brickwork, but I think he was at the point where he just wanted to get it done. He has found a masonry series on YouTube that has restored his enthusiasm for brick laying, so expect more brickwork projects sometime in the not too distant future. 

Continued here.