September 20, 2021

Outdoor Kitchen: Cookstove Progress in Pictures

Continued from here.

This will become the oven.

We needed a stand for the oven rack, so Dan welded one.

Stand for oven rack

Oven door opening under construction.

Side view.

How to make a base for bricks going over the top of the door opening.





This will secure the door in place.

Oven door opening with rack stand in place.

Overhead shot of the oven rack on the stand.

Custom made oven door by Dragon Tech, who specializes 
in doors and accessories for batch box rocket stoves.

The oven door is insulated with rock wool.

Oven side of the stove is done. 

Dan is currently working on the front side, where the firebox is. He's doing it with the oven and firebox on opposite sides because that's the way the plans are. He'd have probably done a whole lot differently, but for a first go with batch box masonry stove, it seemed like a good idea to follow some plans.

Rainy days have enabled most of the progress. With more rain in the forecast, I should have even more progress to show you soon. (Continued here).

September 16, 2021

Shocking Practices in Permaculture

When Dan and I first read Sepp Holzer's Permaculture, we were quite surprised at the heavy equipment Sepp used when he was setting up his farm. He totally rearranged the side of a mountain with a variety of earth moving equipment. At that time, we were meandering down the path of more natural farming and gardening and had come to see massive plowing and tilling as destructive. Because of that, his massive earthworks were shocking.

Thanks to my online permaculture design course, I'm learning that earthworks are the foundation of permaculture design. I'm starting to understand the when and why of earthworks, and how it differs from traditional uses of equipment and machinery. Plowing and tilling are seasonally repeated actions that destroy the soil ecosystem. Permaculture earthworks are carefully planned one-time projects with a specific purpose in mind. That purpose usually revolves around capturing and keeping as much water on the land as possible. Two common examples are ponds and swales. A less common one is ripping the soil.

Ripping is a soil conditioning technique. Have you ever dug a hole in the ground after a heavy rain? I have, and have been shocked to discover that after a good, long, soaking rain, the soil is only moist in the top few inches. The soil under that can be bone dry. This is common anywhere plant growth has been kept short, and/or the area sees a lot of traffic from either herds of animals or heavy equipment. Plants compensate for being mown or eaten by pruning their roots to match the top-growth. If that top-growth stays short, the roots stay shallow, so nothing penetrates the soil including water and oxygen.

In a natural system, deep-rooted trees and plants keep the subsoil from becoming compacted. They also pull up minerals from deep within the soil, for the benefit of the plants and everything that eats them. 

In Australia, a Wallace plow is used to recondition compacted soil. It is designed to specifically open a line in the soil at whatever depth it's set to. It doesn't necessarily tear up and turn the soil, but slices the soil to allow plant roots, air, and rain to penetrate. The soil ecosystem is preserved. The following are from an illustration in Bill Mollison's Permaculture: A Designer's Manual (PDM), page 218, figure 8.11.

Short grasses (from mowing, grazing, or heavy traffic) cause short roots.
The soil is dense and without the structure needed to hold water and air.

Forage growth from 3 rips with the Wallace plow at various 
depths: 2-4 in (5-10 cm), 5-8 in (12-20 cm), 9-12 in (23-30 cm).

I've dug into our soil in numerous places and know how dense and dry the soil is, even one shovel-depth deep. So, I tried to research Wallace plows in the US but came up with nothing. What we did find, was a subsoiler. It's only single shanked, but Dan says the depth can be adjusted somewhat, although not as much as the Wallace plow. Still, something is better than nothing.

Soil ripper aka subsoiler.

Action shot.

Parallel rows in the pasture, made on contour.

Being on contour, rain heading downhill will be caught in the rips and soak deeper into the ground. I sprinkled a fall forage seed mix into the rows, where the roots can now reach deeper depths in the soil. This will then cut or grazed, causing the plants to prune their roots back underground. The living roots push into compacted soil and the pruned roots decompose and add organic matter to deeper levels of the soil. This can be repeated several times.

In the spring, we'll add more rips at hopefully different depths. I'll seed with a summer forage mix. In the PDM, Bill says this technique creates deep humus soils over one or two growing seasons. If that's the case, we've found a great technique to kickstart soil building where it's badly needed.

September 12, 2021

Fall Garden: Planting By Length of Daylight

Several years ago, I blogged about what I had learned about soil temperature and plant growth ("What I'm Learning About Fall Gardening.") For awhile, I tried to plant my fall garden after the soil temperature dropped below 80°F (26.6°C). But for some reason, taking the soil's temperature everyday became extra chore that got lost in the huge pile of other things to do. The other day, I was reading Debby Riddle's blog Riddle Family Farm, and she mentioned the Persephone season. I had completely forgotten about that. I shouldn't have, because the concept is extremely useful for fall and winter gardeners.

The Persephone season is a concept that Eliot Coleman mentions in his books, The Winter Harvest Handbook and Four Season Harvest. The story of Persephone is a mythological explanation of why most plant life becomes dormant in winter. Technically known as solar winter, Eliot's observation is that plant growth pretty much ceases when daylight is less than ten hours in length. For fall planting, the recommendation is to get cold tolerant crops planted so that they are fairly well established by the time solar winter begins. A good estimate of that is approximately 75% of their days to maturity.

According to TimeAndDate.com's sunrise and sunset calculator for my location, 10-hour days begin November 30 for me. So, for example, if a seed packet lists 60 days to maturity, I'll calculate 75% of 60.

60 x 0.75 = 45

So I count back 45 days from Nov. 30 and plant my seed before that date. In this case, before October 16th.

I'm not discounting soil temperature, but have to say that for me and my lifestyle, having a set date really helps. My cooperative extension says to plant fall crops in August, but it's often so hot and dry in August, that planting just doesn't feel right. And I know from experience that if I wait until late October, I'm not planting a fall garden, I'm getting an early start on the following year's spring garden. Intuitively, September has always felt right, so working this out systematically has been very affirming.

This dovetails beautifully with my agrarian year. My winter months are December, January, and February, and I find it fascinating that solar winter for my location begins the last day of November. I love it when all the pieces fit so neatly together.