March 28, 2016

Honeybees! (Here at Last)

After one week's delay, bee day finally arrived: overcast, cool, and lightly rainy. This time, I called ahead to make sure they were ready for pick up. I brought two packages home.


Last year I was excited and nervous, so I didn't try to take photos. In fact, I had to take a card and write out all the steps for hiving the bees. This year I was just excited. I mentally rehearsed the steps and got everything ready, including my camera.

The first step is to pry off the cover of the bee package.

A hive tool comes in handy for many things.

Under the cover is the syrup can. The next step is to pull it out.


Being heavy, it's a little awkward to grab the rim and remove. The white packing strap holds the queen cage in place (unlike last year).


The queen cage is pulled out and inspected to make sure the queen is alive. She is bigger than her attendant bees and marked with a white dot on her back. The color of the dots changes every year so the beekeeper knows how old his or her queen is.

She's in there, alive and hopefully well.

In the above photo you can see that the queen's box has three round chambers. There is a cork plug at each end. The chamber on the left contains sugar candy. The cork on that end is removed.


The bees will eat through the candy to release the queen. This is referred to as an indirect release, as opposed to a direct release. Direct release means the beekeeper releases the queen rather than letting the bees do it. Direct release is not considered the safest way unless the bees are accustomed to that particular queen. If she's in any way unfamiliar to them, they will kill her.

There are different methods for hiving the bees, so what I'm going to show you is not the only way. For those who may not visit my blog often or may not remember, my hives are top bar Warré beehives. (Details here.) To receive the bees, each hive is set up with two boxes like you saw in the first photo. The queen cage is placed on the top bars of the bottom hive box.


Next the bees are dumped rather unceremoniously out of the package and into the hive on top of the queen.


Some folks make room for the package inside the hive, but if I did that I'd have to go back in and remove it. I'd rather not disturb my bees any more than I have to; let's just have one big brouhaha rather than two smaller ones. I will have to remove the queen cage in the near future, but that will be less of a disturbance.

After the majority of the bees are dumped in, the top bars of the top box are put in place.


The feeder comes next, taking care not to squash any bees while putting it on. I used my bee brush to brush away any bees that were in the way and then slid the feeder slowly into place.

I am using 1:1 sugar syrup (by weight) with homemade Honey-B-Healthy
This year I made my HBH with powdered lecithin instead of liquid lecithin.
I think the essential oils blended with the sugar water much more quickly.
The trick is to let the powder soak about an hour before blending in the oils.

The above photo was actually taken the next day when I topped off the feeder. Last year the feeder was open when I put it on and I had a number of bees fly into the syrup and drown. This year I kept it covered with a piece of plywood, sliding the plywood off as I slid on the quilt.

The quilt is a simple box with a burlap bottom. It is filled with an
absorbent material to insulate and absorb excess moisture in the hive.

Lastly I put on the roof. The package still had quite a few bees inside, so I laid it near the hive entrance. By nightfall they found their way into the hive.

So here they are. May I present

Daylily Hive

And

Periwinkle Hive


The last thing I did was to put a welded wire skunk guard around each of the hives. I'll have more on that in an upcoming post, along with other precautions I'm taking to keep my bees safe.


I placed a strip of wood in each entrance to make them smaller at first. The bees have a lot to do to get established, so having a smaller opening will make it easier to defend the hive against potential invaders.


Honeybees make me so happy. 

Next - Queen Check

March 26, 2016

Sour Cream Or Crème Fraîche?

Well now, here's something interesting. I've been working on another of my The Little Series of Homestead How-Tos, this one being about getting cream from goat milk and what to do with it. Of course I research everything extensively, wanting to make sure buyers get their 99¢ worth, ;)

I was looking into sour cream and crème fraîche. Although crème fraîche is sometimes referred to as "European Style Sour Cream," technically these products aren't the same. Sour cream is actually soured (lacto-fermented), while crème fraîche is merely cultured enough to thicken without souring. So I was sitting there, comparing about a dozen internet how-to-make recipes for the two products, and you know what? With the exception of one, the various DIY recipes for each of these two products are exactly the same.

Now, Kurt Timmermeister, author of Growing a Farmer, makes an interesting statement about crème fraîche in his chapter entitled "Raw Milk."
"By morning, part of the cream was at the top; by the next day, even more; and by the third day it had all settled on the top. The result of three days of cream rising to the top of five gallons of Jersey milk after slowly cooling after many hours was the most exceptional cream imaginable. It was crème fraîche."
Well, my goat cream does that too.

Naturally thickened goat cream. I probably don't chill my milk fast enough
to satisfy the milk police, but it turns out I'm making my own crème fraîche!

Maybe I've got something going on that I didn't even know about.

So, sour cream or crème fraîche? Make it how you want and call it what you will, I doubt any of the folks enjoying your delicious recipes will notice or care. They will simply enjoy.

How about that?


March 23, 2016

A Taste of Honey

 “There's no great loss without some small gain.” If you've read Laura Ingalls Wilder's, Little House on the Prairie series, then you're likely familiar with that phrase. The loss of Honeysuckle Hive was a great loss, but we did gain a small amount of honey.

There weren't many filled combs, but enough to harvest for a sample.

Because I want some of the wax as well as the honey, I planned to use the crush and strain method. Last year I bought a bucket strainer system from BeeThinking, because I can use it to strain and store honey. I like it because it includes a honey gate for quick filling of honey containers. It holds 3.5 gallons, however, which I was nowhere close to having. I did use the two straining bags supplied with it, but rigged up my own straining system.

My strainer fits perfectly inside the pie ring which fits perfectly over
the pot. Two of these were just right for the amount of comb I had.

The mesh straining bag folded over the pot and held half my comb.  I
used a wooden potato masher to crush the comb & let the honey flow.

Gravity and warmth are what drains the honey. Honey becomes more viscous as temperatures drop, so a warm kitchen means better drainage into the pot.

How long? A lot of folks seem to leave it only overnight. On one bee forum I read of someone who let it drain for a week. I stirred the crushed comb to check on the honey, and let it sit five days, until most of the honey had drained from the bottom of the mesh bag.

How much?


My yield was six pints. Isn't it pretty?

The comb is then washed, dried, and stored (usually in the freezer) until enough is collected to render. One tip I got over at HoneyBeeSuite was to strain and save that first comb wash water and use it in cooking. I did just that.

Of course, no harvest is complete without some feasting.

Homegrown honey on homemade biscuits.

Because I only strained it, it still contains the pollen and would be considered raw honey. For those interested in some honey processing terms, here they are:

Strained honey - has been poured through a mesh strainer to remove wax and debris
Filtered honey - has been run through a fine filter to remove pollen
Raw honey - not heat treated, not filtered
Pasteurized honey - heat treated to kill yeasts and bacteria (even though honey has known antibacterial effects)

Here's hoping the new hives do better.