March 16, 2010

2010 Goals: Researching HVAC Systems

As many of you mentioned in the comments to my previous post on this subject, the HVAC (heating, ventilation, air conditioning) system is only part of the home comfort/energy efficiency equation. Insulation is the other factor, and we are researching both. In this post, I'll give you the gist of my research into different types of heating and cooling systems. The ones I chose are the systems which were most feasible of us: electric, combustion based, air source heat pumps, ductless mini-split heat pumps, and geothermal heat pumps. For each one I've included links to more information at the US Dept of Energy Energy Savers website.

Electric systems include electric resistance heating and electric air conditioning. Heaters can include electric furnaces, base-board heaters, space heaters, and some radiant heat systems. All air conditioners are electric, no matter what heating system they come with. The advantage to electric heating is that almost 100% of the electricity is converted to heat, so it's efficient. The disadvantage is that not only is it the most expensive way to heat and cool, but also electricity is often produced from oil, gas, or coal generators, which are not efficient as they produce the electricity itself, not to mention they are fossil fuels.

To read more on these systems, click here.

Combustion based are your oil, gas, and propane heaters, often packaged with electric AC. These systems require an open flame to produce heat and hence a pilot light. These are of course, safety concerns. In addition to heat, they produce waste products such as carbon monoxide, requiring them to be vented to the outside. While they are less expensive to run than all electric, they require a lot of maintenance. They are less efficient, typically having an Annual Fuel Utilization Efficiency (AFUE) of 80%. This means that only 80% of the fuel is converted to heat. To be Energy Star rated, a system must have an AFUE of 90%, and these are considerably more expensive as you can imagine.

For more reading on furnaces and boilers, click here.

Air-source heat pumps transfer heat from outdoor air, rather than create heat from a fuel source. This makes them more economical to run. While they can be efficient air conditioners in the summer, they do not work well as heaters if outside temperatures drop to about freezing or below because the air is no longer warm enough to transfer heat from. Consequently most air-source heat pumps in our part of the country are duel-fueled, equipped with a gas heater as well. Gas kicks in when the outdoor temperatures are too cold. Other alternatives would be electric heaters, or as in our case, a woodstove.

Air-source heat pumps have two efficiency ratings, the Seasonal Energy Efficiency Ratio (SEER) for the air conditioner, and a Heating System Performance Factor (HSPF). The most efficient ones have a minimum SEER of 14, and a minimum HSPF of 8. With both ratings, the higher the number the better.

For detailed info on these, click here.

Ductless, mini-split-system heat pumps are air-source heat pumps which can be retrofit to a home without ductwork. After the outdoor unit is installed, 3 inch pipes carry the wiring/tubing to indoor units, which are installed about a foot from the ceiling. They make it easy to zone one's home, but the indoor units themselves are pretty conspicuous and ugly. To me, a cooling source near the ceiling makes sense, but heating doesn't. Why? Because heat of course, rises and the ceiling is not where one wants the heat in winter! Strong blowers can help, but we had ceiling vent registers when we lived in the apartment and didn't think the heat circulated well.

For more information on these systems, click here.

Geothermal heat pumps, also work on transfer heat, but their source is either the earth or water, rather than air. They are least expensive to maintain but most expensive to install, primarily because of the several hundred feet of tubing which needs to be either buried 5 to 6 feet in the ground, or submerged. They have the least impact on the environment of all the options, and the longest service life, something like 25 to 30 years for the unit and 50 years for the tubing.

Click here for more information.

We are not considering radiant heat, as this would be difficult and expensive for us to retrofit (as in tear up all the floors). Nor solar, because we do not get enough sunlight during the winter for it to be truly useful nor worth the expense.

We were able to attend a home and garden show earlier this month and talk to a lot of both HVAC and insulation folks. The next step should be to have a variety of them come out, and give us their spiel and free estimate.



March 15, 2010

Independence Days Challenge - Week 2

Let's see, what have I done since week 1?

1. Plant something –
  • De Cicco broccoli
  • American Flag leeks
  • Parris Island Cos Romaine lettuce
  • Yellow Ebenezer onion sets
  • Cherry Belle radishes
2. Harvest something - nothing this week

3. Preserve something - nothing this week

4. Waste Not–
  • kitchen scraps to the compost
  • soaking water to sourdough starter (see Date Muffin recipe below)
  • uneaten catfood short story - uneaten dry goes to the songbirds, uneaten canned to the chickens.
  • uneaten catfood long story - It seems that Rascal has suddenly decided that he's a finicky eater. Not that he's always eaten anything offered. For years, the only catfood he would eat was Friskies Dental Diet. He didn't like other brands or flavors, he didn't like canned catfood, and he didn't care for table scraps or cooked meat, maybe only a bite or two of raw. For about a month or so now, he's begging to be fed but turns his nose up at almost anything I offer. Needless to say, he's lost a lot of weight and I'm stuck with bags and cans of stuff he doesn't' want. Rather than composting the uneaten stuff, I'm giving it to the chickens and songbirds.
5. Want Not –
  • stocked up on Ezekiel 4:9 flourless, sprouted whole grain cereal from a local discount grocery
  • bought a couple more pounds of baking soda for food storage

6. Build Community Food Systems –
  • blogging about it
  • a neighbor commented on the fence for our new chicken yard, so I know folks are noticing what we do here

7. Eat the Food –
  • from home preserved we're down to jams, jellies, pickles, and relishes
  • Oh! And the spaghetti sauce. Can't forget about that on pizza.
  • sourdough starter in bread, muffins, and pancakes
  • the sauerkraut (yum)
  • Ezekiel 4:9 cereal with the yogurt I made last week
  • tried a new muffin recipe which used both sourdough starter and dates from food storage. Recipe below...

Date muffins

1 cup sourdough starter
1 cup unbleached white flour
1 cup warm water

Mix and allow to sit about an hour and a half. In the meantime soak:

1 cup dried date pieces in warm water

When ready to make add

1 egg
1/2 tsp salt
1 tsp baking soda
1 tsp baking powder (non-aluminum kind)
1/4 C raw sugar
dates, soaked & drained, add soaking liquid to sourdough starter

Mix, spoon into greased muffin tins and bake at 425F about 15 - 18 minutes or until done.

For more Independence Days, click here.

March 13, 2010

New Gadget

Don't ask me why I'm so excited about this thing, but I am. This is what I found on clearance....

My new favorite gadget, clock with indoor & outdoor temps!An atomic wall clock, complete with radio transmitted atomic clock time, day, date, moon phase, indoor, and outdoor temperature! I love the outdoor temperature part. As a gardener those temperatures in spring and fall are important to me. Plus, for some reason I just like keeping track of our daily highs and lows. I'm not sure why, I just do. So this find was a delight and I'm a happy camper.

New Gadget photo and text copyright 13 March 2010 
by Leigh at http://www.5acresandadream.com/